Security seals for analogue or digital tachographs, certified according to EU 16882:2016.
Referenced in:
- Royal Decree 125/2017, which establishes the technical requirements and operating standards that tachograph technical centers must comply with.
- Standard UNE 66102/2017, Management system for technical centers of tachographs.
- Standard UNE-EN 16882:2017, Road vehicles - Safety of mechanical seals used in tachographs. Testing requirements and methods.
ROYAL PACK was the first European company to obtain certification as a manufacturer of security seals for tachographs in accordance with EU regulation EN 16882:2016. Our security seals are identified by a unique sequence number with the prefix RP.
Its design, created for single use, makes the METER NANO T and CLIP SEAL T security seal models one of the most secure on the market, showing visual evidence of fraudulent manipulation or intrusion into the system.
The METER NANO T security seal has been specially developed for use, together with suitable wire, in sealing the gearbox sensor of commercial vehicles. It comes in 10-unit combs to facilitate its use, sequential selection and traceability.
The CLIP SEAL T security seal was specially developed to be used to seal the inspection plates of the tachograph of commercial vehicles. Protect the heads of screws and rivets.
It is presented in honeycombs of 5 units to facilitate its use, sequential selection and traceability.
The 7 mm diameter cover is designed to protect the connections or adjustment areas of analog or digital tachographs, in compliance with the UNE 66102:2017 "Management system of the tachograph technical center". Indelibly marked with the manufacturer's identification “RP” and the YYZZZ part of the technical center code. It comes in a blister of 50 units to facilitate its use, sequential selection and traceability.
Our security seals for tachographs according to EU 16882:2016 are molded with the T logo, with the manufacturer's identification, indelibly marked with the unique sequential number RP and optionally with a two-dimensional code and the code of the technical center.
Commercial File